The hardness of the grinding wheel refers to the firmness of the adhesion between the abrasive grains and the adhesive on the surface of the grinding wheel. The soft hardness of the grinding wheel means that the abrasive grains of the grinding wheel are easy to fall off, and the hardness of the grinding wheel means that the abrasive grains are difficult to fall off. The hardness of the grinding wheel and the hardness of the abrasive are two different concepts. The same abrasive can be made into grinding wheels of different hardness, which is mainly determined by the performance and quantity of the binder and the manufacturing process of the grinding wheel. The significant difference between grinding and cutting is that the grinding wheel has "self-sharpening". Choosing the hardness of the grinding wheel is actually choosing the self-sharpening of the grinding wheel. It is hoped that the sharp abrasive grains will not fall off too early, and the abrasive grains will not fall off after being blunted. The general principle for choosing the hardness of the grinding wheel is: when processing soft metals, in order to prevent the abrasive from falling off too early, a hard grinding wheel should be used. When processing hard metals, in order to be able to timely remove the blunt abrasive grains, thereby exposing new abrasive grains with sharp edges (i.e. self-sharpening), a soft grinding wheel should be used. The former is because when grinding soft materials, the working abrasive grains of the grinding wheel wear very slowly and do not need to be detached too early; the latter is because when grinding hard materials, the working abrasive grains of the grinding wheel wear quickly and need to be updated quickly. When fine grinding, in order to ensure grinding accuracy and roughness, a slightly harder grinding wheel should be used. When the workpiece material has poor thermal conductivity and is prone to burns and cracks (such as grinding cemented carbide, etc.), the selected grinding wheel should be softer.
The organization of the grinding wheel refers to the volume ratio of the three parts of the grinding wheel, namely the abrasive grains, the binder and the pores. It is usually graded by the percentage of the abrasive grains in the grinding wheel volume. There are three organizational states of the grinding wheel: tight, medium and loose; they are subdivided into 0-14, a total of 15 levels. The smaller the organization number, the greater the proportion of abrasive grains and the tighter the grinding wheel; conversely, the larger the organization number, the smaller the proportion of abrasive grains and the looser the grinding wheel.
Grinding wheels are made into various shapes and sizes according to the machine tool structure and the needs of grinding processing. Table 6 shows several commonly used grinding wheel shapes, sizes, codes and uses. The outer diameter of the grinding wheel should be selected as large as possible to increase the peripheral speed of the grinding wheel, which is beneficial to improving the grinding productivity and surface roughness. In addition, if the machine tool rigidity and power permit, if a wider grinding wheel is selected, the productivity can also be improved and the roughness can be reduced. However, when grinding heat-sensitive materials, the grinding wheel width should be appropriately reduced to avoid burns and cracks on the workpiece surface.






